Yamaha DME Designer Owner's Manual page 373

Output Master Window
If you click the [Output Master] button in the matrix mixer component editor, it will open the Output
Master window. Her you can turn the master output for each channel ON and OFF and set the level.
[Matrix Mixer - OutputMaster] editor window
[Matrix Mixer - OutputMaster] G f B ^ [ E B h E
1
2
3
Section Parameter
1
Output Meter
2
Level
3
On
4
Block On
5
Off
6
Nominal
7
Minimum
Setting Range
-- Displays the output signal level for each channel.
- to +10 dB Sets the output signal level for each channel.
ON/OFF Turns ON each channel's output.
-- Turns ON output for all channels in the Output
Master window. When turned ON, the [On] button
lights up.
-- Turns OFF output for all channels in the Output
Master window.
-- Resets all output signal levels in the Output Master
window, making them 0 dB.
-- Resets all output signal levels in the Output Master
window, making them - dB.
Chapter 6 Component Guide
4
5
6
7
Function
DME Designer Owner's Manual 373