Yamaha DME Designer Owner's Manual page 208

Chapter 4 Designer
Crosshairs
Offset Paste/Duplicate from Original By
Sets the position when pasting or duplicating objects.
Auto Suffix Number
Turns automatic appending of sequentially-numbered suffixes to the names of placed objects on or
off.
208 DME Designer Owner's Manual
• [Show Crosshairs While Dragging]
Place a checkmark here to have crosshairs displayed for guidance when dragging the wire
endpoint.
• [Arbitrary Crosshair Length]
Specifies the length of the crosshair lines.
Enter a number into the [Arbitrary Crosshair Length] box to specify the length in pixels.
[Infinite Crosshairs] causes the lines to go all the way to the edge of the window.
• [Auto-size (based on original object)]
If you place a checkmark here, the paste/duplicate position will be automatically adjusted so
that the object does not overlap the original object.
• [Horizontal Pixels] Box
Sets the horizontal distance.
• [Vertical Pixels] Box
Sets the vertical distance.
• [DME/ICP1]
When ON numbered suffixes will automatically be appended to added DME, and ICP objects.
• [Component]
When ON numbered suffixes will automatically be appended to added SPX and user module
objects.
• [Other Objects]
When ON numbered suffixes will automatically be appended to added objects not covered by
the above two categories.