Yamaha DME Designer Owner's Manual page 212

Chapter 4 Designer
DXF File Name
Enter a filename for the DXF file. The default file name entered here will vary according to the
currently active window.
If you click the [...] button at the right of the box, the "DXF File Name" dialog box is displayed.
Specify the DXF file filename and the folder where the file will be saved.
Enter the filename, specify the folder where the file will be saved, then click the [Save] button.
When you return to the "Export DXF" dialog box, the specified filename will be displayed in the
[DXF File Name] box.
NOTE
When you click on the [Save] button in the "DXF File Name" dialog box, the DXF file is not saved. Only when you click on
the [OK] button in the "Export DXF" dialog box, does the DXF file become saved.
Scale
Sets the reduction ratio. When the size of the sheet is large, you can reduce it before exporting it.
Text Style
Specifies the text font for output in DXF format. The default is the "TXT" (drawing font used in CAD).
Block
Sets the block form used in the sheet. Displays a list where you can select the form.
[Block]
Makes the blocks rectangular and groups the text in the port icons and port names.
[Explode]
Makes the blocks into sets of four lines, and does not group the text in the port icons and port
names.
212 DME Designer Owner's Manual