Yamaha DME Designer Owner's Manual page 372

Chapter 6 Component Guide
Input Master
If you click the [Input Master] button in the matrix mixer component editor, it will open the [Matrix
Mixer - InputMaster] editor window. Here you can turn the master input for each channel ON and
OFF and set the level.
1
2
3
4
5
6
7
8
372 DME Designer Owner's Manual
[Matrix Mixer - InputMaster] editor window
[Matrix Mixer - InputMaster] G f B ^ [ E B h E
1
2
3
4
Section Parameter
Input Phase
Level
Solo
On
Block On
Off
Nominal
Minimum
Setting Range
ON/OFF Reverses the phase of each channel's signal.
- to +10 dB Sets the signal level from each channel input to the
output bus.
ON/OFF Turns ON solo for each channel.
ON/OFF Turns ON each channel's input.
-- Turns ON input for all channels in the Input Master
window. When turned ON, the [On] button lights up.
-- Turns OFF input for all channels in the Input Master
window.
-- Resets all output signal levels in the Input Master
window, making them 0 dB.
-- Resets all output signal levels in the Input master
window, making them - dB.
5
6
7
8
Function