Yamaha DME Designer Owner's Manual page 318

Chapter 6 Component Guide
Graphic Control Points
The graph control points show [Output Level] and [Frequency]. As you modify the parameters
using the knobs and edit boxes, the control points move. Also, as you drag the points, the [Output
Level] and [Frequency] parameters reflect the changes you make.
You can adjust the [Output Level] parameter by vertically dragging the control point in the center of
each curve.
You can adjust the [Frequency] parameter by horizontally dragging the control point at the
intersection of the curves for each frequency band.
318 DME Designer Owner's Manual
Changing the [Output Level] Parameter
Changing the [Frequency] Parameter