Download Print this page

Yamaha DME-N Installation Manual

Yamaha dme-n audio mixers: installation guide.
Hide thumbs

Advertisement

PLEASE READ THIS SOFTWARE LICENSE AGREEMENT ("AGREEMENT") CAREFULLY BEFORE USING THIS SOFTWARE. YOU ARE ONLY
PERMITTED TO USE THIS SOFTWARE PURSUANT TO THE TERMS AND CONDITIONS OF THIS AGREEMENT. THIS AGREEMENT IS
BETWEEN YOU (AS AN INDIVIDUAL OR LEGAL ENTITY) AND YAMAHA CORPORATION ("YAMAHA").
BY DOWNLOADING, INSTALLING, COPYING, OR OTHERWISE USING THIS SOFTWARE YOU ARE AGREEING TO BE BOUND BY THE TERMS
OF THIS LICENSE. IF YOU DO NOT AGREE WITH THE TERMS, DO NOT DOWNLOAD, INSTALL, COPY, OR OTHERWISE USE THIS
SOFTWARE. IF YOU HAVE DOWNLOADED OR INSTALLED THE SOFTWARE AND DO NOT AGREE TO THE TERMS, PROMPTLY DELETE THE
SOFTWARE.
1. GRANT OF LICENSE AND COPYRIGHT
Yamaha hereby grants you the right to use one copy of the software program(s) and data ("SOFTWARE") accompanying this Agreement. The
term SOFTWARE shall encompass any updates to the accompanying software and data. The SOFTWARE is owned by Yamaha and/or
Yamaha's licensor(s), and is protected by relevant copyright laws and all applicable treaty provisions. While you are entitled to claim ownership
of the data created with the use of SOFTWARE, the SOFTWARE will continue to be protected under relevant copyrights.
• You may use the SOFTWARE on a single computer.
• You may make one copy of the SOFTWARE in machine-readable form for backup purposes only, if the SOFTWARE is on media where
such backup copy is permitted. On the backup copy, you must reproduce Yamaha's copyright notice and any other proprietary legends
that were on the original copy of the SOFTWARE.
• You may permanently transfer to a third party all your rights in the SOFTWARE, provided that you do not retain any copies and the
recipient reads and agrees to the terms of this Agreement.
2. RESTRICTIONS
• You may not engage in reverse engineering, disassembly, decompilation or otherwise deriving a source code form of the SOFTWARE
by any method whatsoever.
• You may not reproduce, modify, change, rent, lease, or distribute the SOFTWARE in whole or in part, or create derivative works of the
SOFTWARE.
• You may not electronically transmit the SOFTWARE from one computer to another or share the SOFTWARE in a network with other
computers.
• You may not use the SOFTWARE to distribute illegal data or data that violates public policy.
• You may not initiate services based on the use of the SOFTWARE without permission by Yamaha Corporation.
Copyrighted data, including but not limited to MIDI data for songs, obtained by means of the SOFTWARE, are subject to the following
restrictions which you must observe.
• Data received by means of the SOFTWARE may not be used for any commercial purposes without permission of the copyright owner.
• Data received by means of the SOFTWARE may not be duplicated, transferred, or distributed, or played back or performed for listeners
in public without permission of the copyright owner.
• The encryption of data received by means of the SOFTWARE may not be removed nor may the electronic watermark be modified
without permission of the copyright owner.
3. TERMINATION
This Agreement becomes effective on the day that you receive the SOFTWARE and remains effective until terminated. If any copyright law or
provisions of this Agreement is violated, the Agreement shall terminate automatically and immediately without notice from Yamaha. Upon such
termination, you must immediately destroy the licensed SOFTWARE, any accompanying written documents and all copies thereof.
4. DISCLAIMER OF WARRANTY ON SOFTWARE
You expressly acknowledge and agree that use of the SOFTWARE is at your sole risk. The SOFTWARE and related documentation are provided
"AS IS" and without warranty of any kind. NOTWITHSTANDING ANY OTHER PROVISION OF THIS AGREEMENT, YAMAHA EXPRESSLY
DISCLAIMS ALL WARRANTIES AS TO THE SOFTWARE, EXPRESS, AND IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY RIGHTS.
SPECIFICALLY, BUT WITHOUT LIMITING THE FOREGOING, YAMAHA DOES NOT WARRANT THAT THE SOFTWARE WILL MEET YOUR
REQUIREMENTS, THAT THE OPERATION OF THE SOFTWARE WILL BE UNINTERRUPTED OR ERROR-FREE, OR THAT DEFECTS IN THE
SOFTWARE WILL BE CORRECTED.
DME-N Network Driver Installation Guide for LS9
DME-N Network Driver
DME-N Network Driver
Installation Guide for LS9
Installation Guide for LS9
ATTENTION

SOFTWARE LICENSE AGREEMENT

1

Advertisement

   Related Manuals for Yamaha DME-N

   Summary of Contents for Yamaha DME-N

  • Page 1: Software License Agreement

    1. GRANT OF LICENSE AND COPYRIGHT Yamaha hereby grants you the right to use one copy of the software program(s) and data (“SOFTWARE”) accompanying this Agreement. The term SOFTWARE shall encompass any updates to the accompanying software and data. The SOFTWARE is owned by Yamaha and/or Yamaha’s licensor(s), and is protected by relevant copyright laws and all applicable treaty provisions.

  • Page 2

    • The company names and product names in this manual are the trademarks or registered trademarks of their respective companies. LS9 Editor requires DME-N Network Driver Version 1.0.1 or higher. In case you have an older version installed on your system, please make sure to first un-install it and then install the version delivered with LS9 installation package.

  • Page 3: Minimum System Requirements

    To operate your Yamaha hardware from your computer via Ethernet, you'll need to install the DME-N Network Driver software. DME-N Network Driver is software that transfers MIDI data back and forth between your computer and the hardware via Ethernet cable.

  • Page 4

    The “DME-N Network Driver” window will appear. If an application that uses the YAMAHA DME-N Network Driver is running at this time the “Quit all applications that use the DME- N Network Driver in order to change settings.” message will appear. The DME-N Network Driver settings cannot be changed while any application that uses the YAMAHA DME-N Network Driver is running.

  • Page 5

    Set up the driver parameters via the “DME-N Network Driver” window. In order to use the YAMAHA DME-N Network Driver, all computer network devices (switching hubs, routers, etc.) must be properly connected and configured. When you connect the computer to the LS9 directly without network devices, you can use either a crossover or straight cable.

  • Page 6

    When all parameters have been set up as required, click the [Save and Close] button to close the “DME-N Network Driver” window and save the settings. This button is grayed out and is not accessible while an application that is using the YAMAHA DME-N Network Driver is running.

  • Page 7

    “Advanced Settings” Window The parameters in the “Advanced Settings” window set up the YAMAHA DME-N Network Driver for automatic device detection, and allow saving and loading setup files. Auto Detect Allows automatic detection of connected devices. A maximum of 254 addresses (***.***.***.1 through ***.***.***.254) can be detected.

  • Page 8

    The “Local Area Connection Properties” dialog box will be displayed. Select [Internet Protocol (TCP/IP)] on the [General] tab, then click [Properties]. The “Internet Protocol (TCP/IP) Properties” dialog box will be displayed. DME-N Network Driver Installation Guide for LS9 TCP/IP Settings...

  • Page 9

    Enter your computer’s IP address into [IP address], the Gateway’s IP address into [Default gateway], and “255.255.255.0” into [Subnet mask]. When installing on the same subnet as the DME unit(s), set the gateway’s host address to 254. Click [OK]. Restart your computer. DME-N Network Driver Installation Guide for LS9...

  • Page 10

    Enter your computer’s IP address into [IP address], the Gateway’s IP address into [Default gateway], and “255.255.255.0” into [Subnet mask]. When installing on the same subnet as the DME unit(s), set the gateway’s host address to 254. Click [OK]. Restart your computer. DME-N Network Driver Installation Guide for LS9...

  • Page 11

    The latest driver can be downloaded from the Yamaha website • Do you have security software running on your system? Either disable the security software, or set it to allow use of TCP port 12300 on the network card being used by the DME-N Network Driver.

This manual also for:

M7cl

Comments to this Manuals

Symbols: 0
Latest comments: