Yamaha DME Designer Owner's Manual page 366

Chapter 6 Component Guide
All Inputs to One Output
When you click the output channel number on the matrix, the [Delay Matrix - All Inputs to One
Output] editor window opens. All input channels and one output channel are displayed. The output
channel is the one you have clicked on in the delay mixer component editor.
1
2
3
4
5
6
7
8
9
)
Output Channel Switching
The [Delay Matrix - All Inputs to One Output] editor window displays the output channel clicked on
in the delay matrix component editor. The [Channel] buttons in the [Output] section of the [Delay
Matrix - All Inputs to One Output] editor window switch the channel group that is displayed in the
window.
If you make the delay matrix component editor active while the [Delay Matrix - All Inputs to One
Output] editor window is displayed, and then click another output channel, that channel group will
be displayed in the [Delay Matrix - All Inputs to One Output] editor window.
One [Delay Matrix - All Inputs to One Output] editor window is displayed for each delay matrix
component editor.
366 DME Designer Owner's Manual
1
2
3
Section Parameter
Bus Send Level Delay
Level
On
Output Channel
On
Meter
Block On
Off
Nominal
Minimum
5
Setting Range
0 to 500 Sets the delay time for each input channel.
- to +10 dB Sets the output signal level for each input channel.
ON/OFF Turns ON the output for each input channel.
-- Displays the selected output channel. Select
another channel from a menu.
ON/OFF Turns ON the output for the channel displayed in
the window.
-- Displays the output signal level of the channel
displayed in the window.
-- Turns ON all channel inputs. When turned ON, the
[On] button lights up.
-- Turns OFF all channel inputs.
-- Resets all of input signal levels, making them 0 dB.
-- Resets all of input signal levels, making them - dB.
4
7
8
9
)
6
Function