Getting Started; Starting And Setting Up Studio Manager - Yamaha 02R96 Version 2 Owner's Manual

Getting Started

Description of menus and buttons
In the event that menu and button names on the Windows system are different from those on
the Macintosh system, this manual uses the Windows menu and button names followed by the
Macintosh menu and button names in parentheses.
To use Studio Manager, you must follow these steps:
> Start Studio Manager.
> Configure the Editor.
> Synchronize Studio Manager.

Starting and Setting Up Studio Manager

Start Studio Manager.
1
Windows 2000: Click the Start button, move the cursor to [Programs], then [YAMAHA Studio
Manager], then click [Studio Manager].
Windows XP: Click the Start button, move the cursor to [All Programs], then [YAMAHA
Studio Manager], then click [Studio Manager].
Mac OS X: Select [Applications], [YAMAHA], then [Studio Manager], then double-click [Stu-
dio Manager].
2 Select the device you want to edit.
The names of all installed devices are displayed in the
Device Editor section. Select the desired device, the click
the [Add ->] button.
The selected device name appears in the Workspace sec-
tion.
Note: If you plan to use the same device in the future, click
the [Set Default] button while the appropriate device name
is listed in the Workspace section. The next time you start
Studio Manager, the device will be automatically selected.
Specify a MIDI port.
3
Select the [MIDI Ports] tab and specify the MIDI In, Out,
and Thru ports to which the console is connected.
Note: To activate a MIDI port in Studio Manager, you must
also specify the MIDI port in the console's Editor separately.
Refer to the "Configuring the Editor" on
later for information on specifying a MIDI port in Editor.
page 4 described
Studio Manager for V2 02R96 Editor—Owner's Manual
2