Yamaha DME Designer Owner's Manual page 409

Slot Out
The Slot Out component has only an input. There are three types of Slot In components: four-
channel, eight-channel, and 16 channel types.
The component editor can be displayed by right-clicking the component, then clicking [Open Slot
Out Component Editor] on the displayed context menu.
Slot Out component editor
1
3
4
2
5
Parameter
1
Phase ON/OFF
2
On ON/OFF
3
Delay 0 to 24 Samples
4
Level - to ±0 dB
5
Dither Off
16
20
24
Setting Range
Reverses the phase of the output signal for each
channel.
Turns ON each channel's output.
Sets the delay time.
Sets the output level.
Sets the quantization bit rate for conversion.
Chapter 6 Component Guide
Function
DME Designer Owner's Manual 409