Yamaha DME Designer Owner's Manual page 389

Chapter 6 Component Guide
Double-click a component to open the component editor. The component editor is the same for all
types, the only difference being the number of sources.
Source Selector Component
The Source Selector connects the selected input to the output. For example, if you select [1] for a 4
Position 2 Channel component, IN1-1 will be connected to OUT-1 and IN1-2 will be connected to
OUT2. If you select [2] IN2-1 will be connected to OUT-1 and IN2-2 will be connected to OUT2.
DME Designer Owner's Manual 389