Yamaha DME Designer Owner's Manual page 200

Version 1.2
Hide thumbs Also See for DME Designer:
Table of Contents

Advertisement

Chapter 4 Designer
Sheet
There is one sheet in each design window for arranging objects. The size of the sheet and its
background image are specified with the "Sheet" dialog box. This dialog box is displayed using the
[Sheet] command from the [Tools] menu.
Make the window where you are going to change sheet settings active, then click [Tools] menu
[Sheet].
"Sheet" Dialog Box
[Preset Size]
Displays a list where you can select preset paper sizes.
When you select a paper size, numerical values are set for [Horizontal] and [Vertical].
[Custom Sizes]
Set a custom size by specifying the vertical and horizontal sizes of the sheet.
200
DME Designer Owner's Manual
• [Horizontal] Box
Sets the horizontal width of the sheet.
• [Vertical] Box
Sets the vertical height of the sheet.
• [Fixed Aspect Ratio]
When this is checked the relationship between horizontal and vertical is fixed. When the value
for [Horizontal] or [Vertical] changed, the size of the other direction changes so that the
proportions of the paper remain the same.
• [Save As Default Sheet Size]
When turned ON, the current values will become the default for creating sheets. New sheets
will be created at the same size.
NOTE
The upper left is the starting point for measuring sheet size. Therefore, in the [Horizontal] box set the number of
pixels to the right edge, and in the [Vertical] box, set the number of pixels to the lower edge. The boundaries in
which items are already arranged on the sheet will form the minimum sheet size.
Because any objects that are moved, cut, or deleted will return to the same location if the [Undo] command is
used, the minimum sheet size will be determined by the boundaries in which any objects were located, now or in
the past.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents