Yamaha DME Designer Owner's Manual page 222

Chapter 4 Designer
Hotspot
The small white rectangles at the edge of objects are called "Hotspots." Wires usually connect to
hotspots.
• Some hotspots do not have a connection to a logical signal within the hardware.
• Component and user module hotspots normally include logical connections.
• External device hotspots do not include logical connections.
Selecting Hotspots
If you click a hotspot, drawing will start. To select, press <Shift> + click.
You can select multiple hotspots as follows: Select a hotspot with <Shift> + click, then select
additional hotspots using <Ctrl> + <Shift> + click.
222 DME Designer Owner's Manual
Hotspots