Yamaha DME Designer Owner's Manual page 183

[Label] Box
You can enter up to 100 English characters to display over the object.
[Width] Box
Specifies the width of the object in pixels.
[Height] Box
Specifies the height of the object in pixels.
[Style]
Sets the style of the object. From the list, select [Plain], [Raised], [Sunken], or [Image]. When
[Image] is selected the Open dialog will appear. Select an image file and click [Open] to place the
selected image as an object.
[Label Font] Button
Sets the font for the label. Clicking here displays the "Select Font" dialog box.
For information about the "Select Font" dialog box, see
[Label Color] Button
This sets the color of the label text. Clicking here displays the "Select Color" dialog box.
[Inputs/Outputs Labels Color] Button
Sets the color for the I/O port label text. Clicking here displays the "Select Color" dialog box.
[Color] Button
Sets the color of the object. Clicking here displays the "Select Color" dialog box.
NOTE
For information about the "Select Color" dialog box, see
Inputs/Outputs Sets
Sets the number of input/output ports. Enter a number into the [Inputs] box and [Outputs] box, or
set a value using the [ ] and [ ] buttons at the right of each box. The maximum of both input and
output ports is 64.
Edit I/O Port Label
Input and output port names up to 100 characters in length can be entered.
Double-Click Action
Sets the action that occurs when you double-click on a user module object arranged in the
Configuration window.
• [Open User Module Design Window]
Opens the User Module window.
• [Open User Module Editor]
Opens the User Module editor.
page 202.
page 203.
Chapter 4 Designer
DME Designer Owner's Manual 183