Dme Firmware Update - Yamaha DME Designer Owner's Manual

DME Firmware Update

You can update the DME unit firmware using the [Firmware Update] command on the [Tools] menu.
When you move the mouse cursor over the [Firmware] command on the [Tools] menu, a submenu is
displayed.
When you select [Program] or [Component] on the submenu, the "Open" dialog box will be displayed.
You can perform a firmware update by specifying a firmware update file.
When performing a firmware update, connect the DME unit and the computer.
When the DME update is finished, the DME unit will be automatically restarted. You also need to restart
DME Designer.
NOTE
If the firmware has been updated from V1.07 or lower to V1.10 or upper, perform the update twice. Because the text display
data in the DME unit is changed, text display for Japanese is not possible with one update only.
Chapter 3 Main Panel Window
DME Designer Owner's Manual 107