Yamaha DME Designer Owner's Manual page 405

Effect Type Parameter
Delay->ER. Delay L
One input, two
Delay R
output delay and
early reflections FB.Dly
effects in series.
FB.Gain
Hi.Ratio
HPF
LPF
DLY.BAL
Type
RoomSize
Liveness
Ini.Dly
Diff.
Density
ER Num.
Delay+Reverb Delay L
One input, two
Delay R
output delay and
reverb effects in FB.Dly
parallel.
FB.Gain
Delay Hi
HPF
LPF
Dly/Rev
Rev Time
Ini.Dly
Rev Hi
Diff.
Density
Delay->Reverb Delay L
One input, two
Delay R
output delay and
reverb effects in FB.Dly
series.
FB.Gain
Delay Hi
HPF
LPF
Dly.Bal
Rev Time
Ini.Dly
Rev Hi
Diff.
Density
Setting Range
0.0 to 1000.0 ms
0.0 to 1000.0 ms
0.0 to 1000.0 ms
-99 to +99%
0.1 to 1.0
THRU, 21.2 Hz to 8.00 kHz
50.0 Hz to 16.0 kHz, THRU
0 to 100%
S-Hall, L-Hall, Random, Revers,
Plate, Spring
0.1 to 20.0
0 to 10
0.0 to 500.0 ms
0 to 10
0 to 100%
1 to 19
0.0 to 1000.0 ms
0.0 to 1000.0 ms
0.0 to 1000.0 ms
-99 to +99%
0.1 to 1.0
THRU, 21.2 Hz to 8.00 kHz
50.0 Hz to 16.0 kHz, THRU
0 to 100%
0.3 to 99.0 s
0.0 to 500.0 ms
0.1 to 1.0
0 to 10
0 to 100%
0.0 to 1000.0 ms
0.0 to 1000.0 ms
0.0 to 1000.0 ms
-99 to +99%
0.1 to 1.0
THRU, 21.2 Hz to 8.00 kHz
50.0 Hz to 16.0 kHz, THRU
0 to 100%
0.3 to 99.0 s
0.0 to 500.0 ms
0.1 to 1.0
0 to 10
0 to 100%
Chapter 6 Component Guide
Function
Left channel delay time
Right channel delay time
Feedback delay time
Feedback gain (plus values for normal-phase
feedback, minus values for reverse-phase
feedback)
High-frequency feedback ratio
High-pass filter cutoff frequency
Low-pass filter cutoff frequency
Delay and early reflected delay balance (0% = all
early reflected delay, 100% = all delay)
Type of early reflection simulation
Reflection spacing
Early reflections decay characteristics (0 = dead,
10 = live)
Initial delay before reverb begins
Spread
Reverb density
Number of early reflections
Left channel delay time
Right channel delay time
Feedback delay time
Feedback gain (plus values for normal-phase
feedback, minus values for reverse-phase
feedback)
Delay high-frequency feedback ratio
High-pass filter cutoff frequency
Low-pass filter cutoff frequency
Delay and reverb balance (0% = all delay, 100% =
all reverb)
Reverb time
Initial delay before reverb begins
High-frequency reverb time ratio
Spread
Reverb density
Left channel delay time
Right channel delay time
Feedback delay time
Feedback gain (plus values for normal-phase
feedback, minus values for reverse-phase
feedback)
Delay high-frequency feedback ratio
High-pass filter cutoff frequency
Low-pass filter cutoff frequency
Delay and delayed reverb balance (0% = all
delayed reverb, 100% = all delay)
Reverb time
Initial delay before reverb begins
High-frequency reverb time ratio
Spread
Reverb density
DME Designer Owner's Manual 405