Yamaha DME Designer Owner's Manual page 66

Chapter 3 Main Panel Window
[Insert] Button
Inserts the contents of the cut or copied scene into the location of the scene selected on the list.
The selected scene and those below are moved down by one. For example, if "Door_Open" was
stored as scene number "005," and selected when the [Insert] button was clicked, the inserted
scene would become scene number "005," and "Door_Open" would be moved to scene number
"006."
If no scene has been cut or copied, the button will be grayed out and cannot be used.
If a scene is stored in the lowest scene on the scene memory list (with the scene number [999]), the
button will be grayed out and the insert function will not be available. Delete the contents of scene
number 999 before attempting to use the insert function.
NOTE
Move the scene data to a different scene memory when you don't want to erase the contents of Scene No. 999.
[Clear] Button
Deletes the contents of the scene selected on the list.
If the presets included in a scene are not used in another scene, a "Delete preset?" message will
be displayed.
If the presets are not needed, click the [OK] button. If you click the [Cancel] button, the presets will
not be deleted. Whichever you click, the scene itself will be deleted.
NOTE
The [Cancel] button on the "Delete Preset?" message does not cancel the [Clear] for the scene. It merely cancels
deletion of the presets.
66 DME Designer Owner's Manual
Click the
[Insert] button