Yamaha DME Designer Owner's Manual page 371

Matrix (Output Level Meters)
In the matrix, you can view levels for all output channels at once. The meter will be grayed out when
the corresponding channel is set to Off.
Output level meter
When you click an output channel number on the matrix, the [Matrix Mixer - All Inputs to One
Output] editor window opens. When you click the input channel number on the left side of the
matrix, the [Matrix Mixer - One Input to All Outputs] editor window opens.
Click to open the [Matrix Mixer - All
Inputs to One Output] editor window.
Click to open the [Matrix Mixer - One
Input to All Outputs] editor window.
The matrix is divided into groups, each with four input channels and four output channels. When
you place the mouse pointer over a group, its channel numbers are highlighted. Click to open the
[Matrix Mixer - Crosspoint] editor window.
Click to open the "In 1-4 x Out 5-8"
[Matrix Mixer - Crosspoint] editor window
Chapter 6 Component Guide
DME Designer Owner's Manual 371