Yamaha DME Designer Owner's Manual page 60

Chapter 3 Main Panel Window
"Add User" Dialog Box/"Change User Information" Dialog Box
When you click the [Add User] button in the "Security" dialog box, the "Add User" dialog box is
displayed. If you click the [Change] button in the "Security" dialog box, the "Change User Information"
dialog box is displayed.
The "Add User" dialog box is for setting a user name and password when adding a new user. You can
change user settings in the "Change User Information" dialog box. The contents of the dialog boxes
are the same.
[Name] Box
Enter the user name. Enter a name different than other existing user names.
[Password] Box
Enter the password. When you type in the password box, asterisks (*) will be displayed instead of
the characters you enter. If you do not want to set a password the user, leave the box blank.
[Confirm Password] Box
Enter the password once again to confirm it. When you type in the password box, asterisks (*) will
be displayed instead of the characters you enter. If you do not want to set a password the user,
leave the box blank.
[Startup User Control]
When a user logs on, user controls and settings which are specified or below that user's security
level are automatically opened.
In the "Security" dialog box [User List], [User Control] will be "ON" for users for whom this option
has been turned on.
[OK] Button
In the "Add User" dialog box, this creates new users according to the settings made there. In the
"Change User Information" dialog box, this applies the dialog box settings and changes the user
settings.
[Cancel] Button
Cancels user creation or setting changes, and closes the dialog box.
60 DME Designer Owner's Manual
"Add User" dialog box "Change User Information" dialog box