Yamaha DME Designer Owner's Manual page 171

Chapter 4 Designer
External Device Object Context Menu
[Open Component Editor]
Starts the application assigned to the object.
For the [AD824] and [AD8HR], it opens the component editor.
[Cut]
Cuts the selected object and moves it to the clipboard.
[Copy]
Copies the selected object to the clipboard.
[Paste]
Pastes the object that is on the clipboard.
[Delete]
Deletes the object you clicked on.
[Duplicate]
Duplicates the object you clicked on.
[Display Order]
Changes the display order of the objects, according to a command in the submenu.
[Properties]
Displays the "External Device Properties" dialog box.
At the lowest position below [External Device], [AD824] and [AD8HR] display the "Serial Controlled
Device Properties" dialog box. The other objects display the "External Device Properties" dialog
box.
External Device Properties
To display the "External Device Properties" dialog box, select any external device object besides
AD824 or AD8HR, then click the [Properties] command on the [Edit] menu.
[Label] Box
You can enter up to 100 English characters to display over the object.
[Width] Box
Specifies the object width in pixels.
[Height] Box
Specifies the object height in pixels.
DME Designer Owner's Manual 171