Yamaha DME Designer Owner's Manual page 337

1
Compressor Curve
2
Gain Reduction Meter
3
Output Meter
Parameter
4
Threshold -54 dB to ±0 dB
5
Ratio 1:1 to :1
6
Knee HARD, 1, 2, 3, 4, 5
7
Attack 0 to 120 ms
8
Release 44.1 kHz: 6 ms to 46 s
48 kHz: 5ms to 42.3 s
88.2 kHz: 3 ms to 23 s
96 kHz: 3 ms to 21.1 s
9
Gain ±0 dB to +18 dB
)
KeyIn Mono
Stereo
!
On ON/OFF
De-Esser
Compresses the signal above a specified frequency. The de-esser controls sibilant (hissing) sounds
included in speech that are produced by the letter "S." Both mono channel and stereo channel de-
essers are provided.
Mono channel de-essers have one input and one output each. Stereo channel de-essers have two
inputs and two outputs each.
Name
Setting Range
SELF
KEYIN
L
R
LR BOTH
KEYIN
+20
+10
Ratio=2:1
0
–10
Knee = Hard
–20
–30
–40
–50
–60
–70
–70 –60 –50 –40 –30 –20 –10 0 +10 +20
Input Level (dB)
Chapter 6 Component Guide
Function
Displays results graphically. The horizontal axis is
the input signal level, and the vertical axis is the
output level.
Displays the gain reduction attenuation.
Displays the output signal level.
Function
Sets the threshold value.
Sets the compression ratio.
Sets the way compression is applied.
Sets the attack time.
Sets the release time.
The setting range may very, depending on the
operating frequency.
Sets the output gain.
Selects the trigger source from a menu. The
currently selected trigger source is displayed on the
button.
Turns the compressor ON.
Threshold = –20dB
DME Designer Owner's Manual 337