Yamaha DME Designer Owner's Manual page 165

Analog I/O
Sets the label for the DME24N I/O port. When you click the [Edit I/O Port Label] button, the "Edit
Port Label" dialog box is displayed.
Cascade
Turns the DME 64N cascade ON or OFF.
• Show Cascade Port
Checking this enables cascade.
• Cascade Setting
Here you can make settings that apply when cascade is enabled. Clicking here displays the
"Cascade Setting" dialog box.
I/O Card
Settings for the [Slot1] ~ [Slot4] I/O cards. [Slot1] only can be set for DME24N.
• [Select I/O Card]
Specifies the type of I/O card.
• [Card Label]
I/O card names having up to 100 characters can be entered here.
• [Edit SlotN I/O Port Label] Button
Specifies an I/O port label for each slot. Clicking here displays the "Edit Port Label" dialog
box.
Port Style On Zone Window
Specifies how the DME ports appear in the zone window.
• [Audio Port (Classic Style)]
Displays all audio ports.
• [Custom Port Style]
Customizes the port display.
[Left]
Sets the number of ports to be displayed on the left.
[Right]
Sets the number of ports to be displayed to the right.
• [Edit Port Label and Type]
Sets the label and type for each port. Click to display the [Edit Port Label] dialog.
[OK] Button
Accepts the changed settings and closes the dialog box.
[Cancel] Button
Closes the dialog box without changing the settings.
Chapter 4 Designer
DME Designer Owner's Manual 165