Project Files - Yamaha DME Designer Owner's Manual

Chapter 2 DME Designer Overview

Project Files

Project Files
Systems built with DME Designer are saved as project files. Project files have ".daf" as the extension
for their filenames.
These files include settings for the area, zones, configurations, and each parameter.
Since only one project file can be open at a time, before you can open a second file, the first one must
be closed.
The commands for opening project files, creating new ones, and saving them, are found in the [File]
menu of the Main Panel window.
Creating New Project Files
Project files are created using the [File] menu
1
Click [File] menu
Since the currently open project file must be closed before a new one can be created, a "Project
file has been modified. Save?" dialog box will be displayed.
2
To save the file, click [Yes]. To close without saving, click [No].
If you click [Yes], the file currently saved with the same name will be overwritten. If the file has not
been saved, the File Save dialog box will be displayed.
A new project file will be created.
22 DME Designer Owner's Manual
[New] command in the Main Panel window.
[New] in the Main Panel window.