Viewing, Saving, Or Deleting A Certificate; Specifying The Minimum Certificate Key Length - Xerox WorkCentre 7970 System Administrator Manual

Click Browse or Choose File, navigate to the signed certificate in .pem or PKCS#12 format, and click
6.
Open or Choose.
Click Next.
7.
8. Type a Friendly Name to help identify the certificate in the future.
Click Next.
9.
The digital certificate appears in the list of Installed certificates.

Viewing, Saving, or Deleting a Certificate

1. On the Security Certificates page, click a certificate type tab.
2. To view or save a certificate, under Action, click View/Save.
Certificate details appear on the View/Save Device Certificate page.
a. To save the certificate file to your computer, at the bottom of the page, click Save Base-64
encoded (PEM).
b. Click Cancel to return to the Security Certificates page.
To delete a certificate, select the check box next to the certificate name and click Delete.
3.
Note: You cannot delete the Default Xerox Device Certificate.
4. Click Reset to Machine/Device Factory Defaults to delete all certificates except the Default Xerox
Device Certificate.

Specifying the Minimum Certificate Key Length

You can specify the minimum encryption key length required for certificates. If a user attempts to
upload a certificate that contains a key that does not meet this requirement, a message appears. The
message alerts the user that the certificate they are attempting to upload does not meet the key length
requirement.
1. In CentreWare Internet Services, click Properties>Security.
Click Certificates>Certificate Key Length.
2.
Under Minimum Encryption Key Length, select 1024-bit minimum, 2048-bit minimum, or No
3.
Minimum.
4. Click Apply.
® ®
Xerox WorkCentre 7970 Multifunction Printer
System Administrator Guide
Security
®
109