Softing smartLink HW-DP User Manual page 9

Weight
Power Supply
Typical Power Loss
Operating Temperature
Storage Temperature
Relative humidity
Cooling
Mounting
Protection
Altitude
Usage location
Version EN-012025-1.32
about 430g
18 VDC ... 32 VDC; SELV/PELV power supply mandatory, typical input
current: 200 mA, maximum input current: 1 A (allowing for in-rush current
at switch-on)
5 W
-40 °C ... +65 °C (see also Section
-40 °C ... +85 °C
10 % ... 95 %, non-condensing
convection, no fan
DIN rail 35 mm
IP20
intended use must not exceed 2000 m in altitude
indoor use only; no direct sunlight
Chapter 2 - About smartLink HW-DP
18
Installation Positions )
9