Softing smartLink HW-DP User Manual page 34

smartLink HW-DP - User Guide
The system performs a firmware file check. The download starts automatically. When the download
is completed, the smartLink HW-DP will be rebooted. You will be prompted to log in again to the
user interface. When the boot process is completed, the RUN and the PWR LED are green.
You will now see the updated firmware version shown on the device information page.
34
Note
If the user login page of the user interface does not open automatically, press F5 to
reload the page.
Note
If you encounter a problem during the update you can always repeat it.
Version EN-012025-1.32