Softing smartLink HW-DP User Manual page 22

smartLink HW-DP - User Guide
6. Select Settings
Chapter
3.2 Commissioning
The smartLink HW-DP comes with an integrated web server which is used to configure the device and
parameterize the connected PROFIBUS devices. The default IP address of the integrated web server is
192.168.0.10. To access the smartLink HW-DP from your PC, you either have to change the default IP
address of the integrated web server to an address on your network or change the IP address on your
PC network adapter to match the network address of your device (e.g. 192.168.0.1). Section
Section 4.3
3.2.1 Software installation
When you install a Softing product for the first time, you will be asked if you trust the publisher.
Activate the option Always trust software from Softing AG if you do not want to be asked in
subsequent installations and select [Install] to start the installation.
1. Go to the smartLink HW-DP
Configure, PROFIdtm and smartLink DTM)*
2. Start by downloading and installing the Search and Configure tool.
3. Follow the on-screen installation instructions.
4. Read the license agreement carefully.
If you have questions, you can [Cancel] the installation at this point and contact us. Click [Print] if
you want to print the license agreement to a PDF or on a printer.
22
à
Choose Firmware File... to update the firmware of your smartLink HW-DP . See
33
Firmware update for details.
26
describe how to perform either of the two settings.
product website to download the latest software (Search and
24
4.2 and
Version EN-012025-1.32