Softing smartLink HW-DP User Manual page 52

smartLink HW-DP - User Guide
4.1.5.2
Device assignment
The PROFIBUS network can be accessed through multiple clients in parallel. As any parallel access of the
same slave may create an undefined state, each Ethernet interface of the smartLink HW-DP can be
configured with a designated PROFIBUS device address range. So clients connecting to the network via
smartLink HW-DP only see devices which are assigned to the interface they are using.
1. Select PROFIBUS
2. Click [Add] to define an address range for the PROFIBUS devices.
3. Click [Apply].
4.1.5.3
Log
The PROFIBUS log represents
troubleshoot a connection problem.
Click [Refresh] to update the PROFIBUS log.
52
à
Device Assignment.
Note
To add address ranges to make sure that the PROFIBUS bus parameters are set and the
DP1 segment is deactivated. Overlapping address ranges are indicated by the icon
the state of the PROFIBUS connection. The data helps Softing Support
.
Version EN-012025-1.32