Softing smartLink HW-DP User Manual page 35

4.1.3.4
Reset
Unlike a hard reset described in chapter Resetting the device under Hardware Installation, this soft
reset deletes the configuration of your smartLink HW-DP and restores the factory settings of the
device.
1. Select Settings
2. Select [Erase Configuration] to reset your device to default settings.
3. Click [OK] to confirm your selection.
Your smartLink HW-DP will be restarted with the default settings. License files and IP settings will
not be deleted.
Version EN-012025-1.32
à
Reset in the side bar navigation.
Note
You need to be logged in as
Note
The password is reset to the
Chapter 4 - Working with smartLink HW-DP
31
administrator .
27
default password .
35