Softing smartLink HW-DP User Manual page 58

smartLink HW-DP - User Guide
4.2 Connecting to Emerson AMS Device Manager
The Emerson AMS Device Manager is a software platform used for managing and maintaining field
devices in industrial automation systems. It is part of Emerson's broader suite of asset management
solutions, designed to help operators and maintenance engineers optimize the performance, reliability,
and lifespan of their instrumentation and control devices. For details on how to connect your smartLink
HW-DP over HART IP with an Asset Management System (AMS) see Sections
device assignment
4.2.1 Using Emerson AMS
The following section describes how to configure your network using the Emerson Asset Management
System. For details see also the Emerson AMS user manual.
4.2.1.1
Prerequisites
§
Emerson AMS (version 14.1 or later) is installed on your PC.
§
smartLink HW-DP is properly commissioned (see Chapter
§
Your smartLink HW-DP has sufficient licenses available (see Chapter
§
Your Emerson AMS has an Emerson HART-IP license.
§
HART IP server is activated for Segment DP1 (see
§
Add Remote IOs to Network Topology is activated.
58
52
.
Commissioning
Licensing
53
HART IP Settings ).
53
HART IP and PROFIBUS
22
).
38
).
Version EN-012025-1.32