Softing smartLink HW-DP User Manual page 30

smartLink HW-DP - User Guide
4.1.3 Settings
4.1.3.1
Network
Select Settings
Note
You need to be logged in as
settings. If you change the settings you must restart the device.
Parameter
Obtain IP address from a DHCP
server
IP address
Subnet mask
Default gateway
Hostname
Enable discover services
Apply
30
à
Network to view and change the TCP/IP settings.
Administrator or Maintenance
Meaning
The Dynamic Host Configuration Protocol (DHCP) is activated and the IP
address is obtained from a DHCP server.
Internet Protocol (IP) address of the device used for web access.
Subnet mask of the device used for web access.
Default gateway of the device used for web access.
Name of the device used by a name server.
Check the box to enable Simple Service Discovery Protocol (SSDP)
mulicast DNS (mDNS) and SearchAndConfigure.
Click [Apply] to confirm changes made in this window.
31
user to change default
Version EN-012025-1.32