smartLink HW-DP - User Guide
3.2.2
Prerequisites
§
The smartLink HW-DP is connected with a PC which runs a Chrome or Firefox browser supporting
JavaScript.
§
The Search and Configure tool is installed.
3.2.3
Changing the IP address of a smartLink HW-DP
Before you can operate the connected smartLink HW-DP you will have to change the default IP address
of your device so that your PC can communicate with the integrated web server over the Local Area
Network.
The following steps apply to Windows 10.
1.
Click Start
The application window is opened.
2.
Click the dropdown list of the Network Adapter Selection.
This selection menu shows all networks of your PC.
3.
Select the network adapter which is connected to the smartLink HW-DP .
4.
Click [Search] to start searching for connected devices.
The search may take a moment.
5.
Select the smartLink HW-DP.
6.
Click [Configure] or double-click the device.
The configuration window opens. Here you can change the IP settings.
24
à
à
Softing
Search and Configure.
Version EN-012025-1.32
Need help?
Do you have a question about the smartLink HW-DP and is the answer not in the manual?