Softing smartLink HW-DP User Manual page 28

smartLink HW-DP - User Guide
Working with smartLink HW-DP
4
The following chapter describes how to connect to the smartLink HW-DP user interface and use the
tools and technologies of the Asset Management System manage (configure, parameterize,
troubleshoot and maintain) field devices on your network. See also the Video tutorial
using Softing smartLink
Note
See Section
4.1 User interface
4.1.1 General functions
All interface windows display the following functions:
Restart Device
This function is available only when logged in as administrator or maintenance engineer and is used to
restart the device remotely as instructed in this user guide or whenever required in ongoing operation.
Logout
Select this function to log out as an active user.
Auto logout
This default setting logs out the current user from the device if the interface has been inactive for 10
minutes.
4.1.2 Information
The Information window shows detailed product-related information in the menus System, License and
About, including the type of device, the hardware version, bootloader and firmware version installed
on your device.
28
HW-DP.
Log in to user interface
27
for details on how to access the interface..
Integrating and
Version EN-012025-1.32