Configuring The Network Interface Board Settings - Ricoh CL2000 Operating Instructions Manual

Configuring the Network Interface Board Settings

A A A A
Start the Web browser.
B B B B
Point your browser at the URL or IP address of the printer (e.g. http://XXX.XXX.XXX.XXX
where the Xs are the number of the IP address).
The status of the printer you chose appears on the Web browser.
C C C C
Click [Configuration].
The dialog box for entering the password and user name is displayed.
D D D D
Enter your user name and password, and then click [OK].
To use the factory default account, enter no user name and type "password" for the password.
E E E E
Click the item you want to configure, and then make all the settings.
The following items can be configured:
[General]
Configure the general settings for the machine here.
[TCP/IP]
Configure the TCP/IP-related settings for the Network Interface Board, the optional 802.11b In-
terface Unit, and the optional 1394 Interface Unit.
[SNMP]
Configure the appropriate community settings here. Up to 10 types of community names can be
registered.
[NetWare]
Configure the settings for printing in a NetWare environment here.
Operating Instructions Administrator Reference
111