Figure 1-3. Components on the Front Panel with the Bezel Removed
Bezel hinge hole
(1 of 3)
Power switch
System LCD
Bezel hinge hole
(2 of 3)
Bezel hinge hole
(3 of 3)
The following subsections describe the components that are located on the front panel of
the J5000 and J7000 workstations, including:
• Power switch
• System LCD
• Internal storage devices:
— Hard disk drive(s)
— Optional CD drive
— Optional DDS-3 tape drive or floppy disk drive
Power Switch
The power switch is located on the left side of the front panel as part of the power
switch/LCD assembly. Use the power switch to power the workstation on and off.
NOTE
The J5000 and J7000 workstations have a "soft power down" feature that
shuts the operating system down in a controlled manner when you power off
the workstation with the power switch. (That is, you do not need to execute
shutdown -h prior to pressing the power switch to power off the workstation.)
Chapter 1
DDS-3 tape drive or
floppy drive bay
Front Panel Components
CD drive
Bezel-detach
screw hole
(1 of 2)
}
Hard disk drives
Bezel-detach
screw hole
(2 of 2)
Product Information
19
Need help?
Do you have a question about the Visualize J7000 and is the answer not in the manual?
Questions and answers