Front I/O And Power Switch Assembly - HP 280 G2 Maintenance And Service Manual

Front I/O and power switch assembly

1. Prepare the computer for disassembly
2. Remove the computer access panel
3. Remove the front bezel
4. Remove the cables from the clips on the base pan.
5. Disconnect the three cables from the following system board connectors:
F_PANEL (black)
F_USB1 (white)
F_AUDIO (yellow)
(Preparation for disassembly on page
(Access panel on page
(Front bezel on page 19).
17).
18).
Front I/O and power switch assembly 37