Assigning Scsi Device Ids - HP Visualize J7000 Supplementary Manual

Assigning SCSI Device IDs

Before assigning a SCSI device ID to a new SCSI device, you need to determine which
SCSI device IDs are available. To view the SCSI IDs already in use, type the following
command at the prompt and press [Enter]:
/usr/sbin/ioscan -f
After a few moments, the ioscan utility lists all of the I/O devices it could find. The list
appears similar to the following:
Class I H/W Path
============================================================================
bc 0
bc 1 10
ba 0 10/0
- ROPEtoPCI
graphics 0 10/0/1/0
lan 0 10/0/12/0
audio 0 10/0/13/0
ext_bus 0 10/0/14/0
target 0 10/0/14/0.0
disk 0 10/0/14/0.0.0
CDR-8435 CDROM
target 0 10/0/14/0.7
ctl 0 10/0/14/0.7.0
ba 1 10/0/14/1
Adapter
tty 0 10/0/14/1/1
RS-232C
tty 1 10/0/14/1/2
RS-232C
ext_bus 1 10/0/14/1/3
Parallel Interface
pc 0 10/0/14/1/4
Floppy Drive
floppy 0 10/0/14/1/4.1
HP_PC_FDC_FLOPPY
usb 0 10/0/14/2
Interface
usbhub 0 10/0/14/2.1
ext_bus 2 10/0/15/0
SCSI Dual Port
target 1 10/0/15/0.7
Appendix C
Driver S/W State
root CLAIMED
ccio2 CLAIMED
ROPEtoPCI CLAIMED
graph3 CLAIMED
btlan3 CLAIMED
audio CLAIMED
side CLAIMED
tgt CLAIMED
sdisk CLAIMED
tgt CLAIMED
sctl CLAIMED
superio CLAIMED
asio0 CLAIMED
asio0 CLAIMED
SCentIf CLAIMED
siofdc CLAIMED
sioflop CLAIMED
hcd CLAIMED
hub CLAIMED
c720 CLAIMED
tgt CLAIMED
SCSI Connections
Assigning SCSI Device IDs
H/W Type Description
BUS_NEXUS
BUS_NEXUS I/O Adapter
BUS_NEXUS PCI Bus Bridge
INTERFACE PCI(103c1005)
INTERFACE PCI(10110019)
INTERFACE Built-in Audio
INTERFACE PCI(100b0002)
DEVICE
DEVICE HITACHI
DEVICE
DEVICE Initiator
BUS_NEXUS PCI Core I/O
INTERFACE Built-in
INTERFACE Built-in
INTERFACE Built-in
INTERFACE Built-in
DEVICE
INTERFACE Built-in USB
DEVICE USB Root Hub
INTERFACE Ultra2 Wide
DEVICE
195