HP Visualize J7000 Supplementary Manual page 107

7. Insert and tighten the two T-15 Torx screws to secure the DDS-3 tape drive to the front
panel of the workstation, as shown in Figure 4-12 on page 101.
8. Replace the DDS-3/floppy disk drive EMI cover and top panel.
9. Replace the front panel bezel.
10.After rebooting, use SAM to confirm that the DDS-3 tape drive is recognized by the
system.
Chapter 4
Field Replaceable Units (FRUs)
FRU Removal and Replacement
103