Front I/O And Power Switch Assembly - HP EliteDesk 705 G2 Maintenance And Service Manual

Front I/O and power switch assembly

1. Prepare the computer for disassembly
2. Remove the computer access panel
3. Remove the front bezel
4. Remove the Torx T15 screw (1) that secures the assembly to the chassis, push the tab on the right side
of the assembly (2) to disengage it from the chassis, and push the assembly into the chassis (3).
5. Remove the cables from the clips on the base pan.
42 Chapter 4 Removal and replacement procedures – Microtower (MT) chassis
(Preparation for disassembly on page
(Access panel on page
(Front bezel on page 21).
19).
20).