HP Visualize J7000 Supplementary Manual page 73

Table 3-1. Chassis Codes for J5000 and J7000 Workstations
Ostat Code FRU
INI 8890 IO BD
FLT 8890 IO BD
INI 88A0 IO BD
WRN 8A03 EXT IO
WRN 8A04 EXT IO
TST 8C06 EXT IO
WRN 8C07 EXT IO
WRN 8C08 SYS BD
WRN 8C09 IO BD
WRN 8C0A EXT IO
WRN 8C0B IO BD
WRN 8C0C EXT IO
WRN 8C0F IO BD
WRN 8DEC IO BD
SHU 8DEC IO BD
FLT 8E10 IO BD
FLT 8E11 IO BD
FLT 8E12 IO BD
FLT 8E13 IO BD
FLT 8E20 IO BD
WRN 9001 EXT IO
INI 9151 IO BD
INI 9152 IO BD
INI 915F IO BD
Chapter 3
Message
early Super init
Super init fail
Super init done
No graph console
No USB keyboard
PCI BIST test
PCI BIST error
PCI alloc error
PCI mem mngr err
PCI mem type err
PCI max bus dpth
PCI dev not cnfg
dev tree ovrflow
init LAN SROM
resetting system
PARALEL port cfg
SERIAL1 port cfg
SERIAL2 port cfg
FLOPPY drive cfg
bad USB port cfg
no console found
init SERIAL_1
init SERIAL_2
init unknown dev
Identifying LCD-Indicated Conditions
Description
Initializing Super-I/O for early RS-232
output.
Couldn't initialize Super-I/O.
Super-I/O initialization complete.
Cannot re-establish communications with
the graphics console.
Cannot re-establish communications with
the USB keyboard.
Running PCI Built-In Self-Test
PCI Built-In Self-Test failed.
PCI address space allocation failed.
Memory allocation for PCI device failed.
PCI device requested invalid memory
type.
PCI bus depth exceeded maximum
supported depth.
Unable to configure PCI device.
Data space for PCI devices is full.
Initializing the core LAN serial EPROM.
Restarting system after core LAN
initialization.
Parallel port configuration failed.
Serial 1 port configuration failed.
Serial 2 port configuration failed.
Floppy drive configuration failed.
USB port configuration failed.
Search for console display device failed.
Initializing serial 1 port as console
display.
Initializing serial 2 port as console
display.
Initializing unknown device as console
display.
Troubleshooting
69