Memory; Figure 2-3. Dds-3 Tape Drive Settings For Data Compression Operation Mode - HP Visualize J7000 Supplementary Manual

Figure 2-3. DDS-3 Tape Drive Settings for Data Compression Operation Mode

Operation Mode
Switches
Compression Disabled,
No Host Control
Compression Disabled, Host
Can Control Compression
Floppy Disk Drive (Optional) Configuration
The optional 3.5-inch floppy disk drive requires no ID, switch, or jumper settings. See the
section titled "Floppy Disk Drive (Optional)" on page 104 for details on installing a floppy
disk drive.

Memory

J5000 Memory Configuration
The J5000 workstation has eight memory slots, labeled 0 to 7. Memory DIMMs can be
installed individually in this workstation. The DIMMs for this workstation currently come
in 256 MB and 512 MB sizes (Product Numbers A4994A and A4995A, respectively). This
workstation comes with one 512 MB DIMM as its standard configuration from the factory.
Thus, currently the minimum memory configuration for this workstation is 512 MB, and
the maximum is 4 GB.
DIMMs should be loaded in the order shown in Figure 2-4 on the next page, with slot 0
being the first DIMM loaded, and 7 being the last DIMM loaded. Different sizes of
DIMMs can be loaded in this workstation (that is, 256 MB DIMMs can be loaded with
512 MB DIMMs).
Chapter 2
Field Replaceable Unit (FRU) Configurations
Compression Enabled,
No Host Control
Compression Enabled,
With Host Control
Default Setting
Configuration
39