Figure 4-21. Arrows Indicate Where To Pull On The Ejector Handle; Figure 4-22. Removing The Bus Bar Shield; Figure 4-23. Bus Bar Thumbscrews - HP Visualize J7000 Supplementary Manual

Figure 4-21. Arrows Indicate Where to Pull on the Ejector Handle

3. Remove the bus bar shield at the top of the workstation, as shown in Figure 4-22.

Figure 4-22. Removing the Bus Bar Shield

4. Remove either the four bus bar thumbscrews on the J5000 workstation, or the five bus
bar thumbscrews on the J7000. Figure 4-23 shows these thumbscrews on the J5000
workstation.

Figure 4-23. Bus Bar Thumbscrews

Chapter 4
Field Replaceable Units (FRUs)
FRU Removal and Replacement
Bus bar shield
111