Figure 4-64. Removing The Speaker From The Mounting Bracket; Figure 4-65. Threading The Fan Cable Through The Plastic Slot - HP Visualize J7000 Supplementary Manual

Field Replaceable Units (FRUs)
FRU Removal and Replacement
9. Slide the speaker out of the guides in the fan/speaker mounting bracket, as shown in
Figure 4-64.

Figure 4-64. Removing the Speaker from the Mounting Bracket

Replacing the Speaker
To replace the speaker, do the following:
1. Reinsert the speaker in the fan/speaker mounting bracket.
2. To avoid interference with the I/O card guide rails, you must thread the speaker and fan
cables through the plastic slot adjacent to the release tab for the fan/speaker mounting
bracket, as shown in Figure 4-65.

Figure 4-65. Threading the Fan Cable through the Plastic Slot

144 Chapter 4