Defining Snmp Notification Filters - D-Link xStack DXS-3250E Web/Installation Manual

Defining SNMP Notification Filters

The SNMP Notification Filter Page permits filtering traps and informs based on OIDs. Each OID is linked to a
device feature or a portion of a feature. The SNMP Notification Filter Page also allows network managers to filter
notifications. To define SNMP notification filters:
1. Click System > SNMP > Notification > Notification Filter. The SNMP Notification Filter Page opens:
Figure 188:SNMP Notification Filter Page
The SNMP Notification Filter Page contains the following fields:
•
Filter Name — Contains a list of user-defined notification filters.
•
Object Identifier Subtree — Displays the OID for which notifications are sent or blocked. If a filter is
attached to an OID, traps or informs are generated and sent to the notification receivers. OIDs are selected
from either the Select from field or the Object ID field.
•
Filter Type — Indicates whether to send traps or informs relating to the selected OID.
–
Excluded — Does not send traps or informs.
–
Included — Sends traps or informs.
•
Remove — Deletes filters.
–
Checked — Deletes the selected filter.
–
Unchecked — Maintains the list of filters.
Page 269
Configuring SNMP
Configuring SNMP Notifications