Table of Contents
Advertisement
Step
Description
4
An initialization confirmation dialog box opens.
Initialize Disk(s)
Create Array
Delete Array(s)
Swap Two Arrays
Hide/un-Hide Array(s)
View Disk Details
View Array Details
Rescan All Channels
Controller Options
Continue to Boot
Press the <C> key to confirm and to continue with the initialization of all hard disks drives.
After about a minute, all Disks should become initialized.
Create Array
Step
Description
1
Next, select the Create Array option and press the <ENTER> key.
Creates an array from the connected disks
Initialize Disk(s)
Create Array
Delete Array(s)
Swap Two Arrays
Hide/un-Hide Array(s)
View Disk Details
View Array Details
Rescan All Channels
Controller Options
Continue to Boot
BC4852 Array Configuration (Build: xx-xxx-xxxxxxx.x)
Arrays
0-00-XXXGB-Empty
1-01-XXXGB-Empty
2-02-XXXGB-Empty
3-03-XXXGB-Empty
4-04-XXXGB-Empty
5-05-XXXGB-Empty
6-06-XXXGB-Empty
Main Menu
7-07-XXXGB-Empty
All data on the selected disk will be
8-10-XXXGB-Empty
permanently lost. Are you sure you
9-11-XXXGB-Empty
want to initialize the drives?
A-12-XXXGB-Empty
B-13-XXXGB-Empty
Press (C) to continue, <Esc> to cancel
C-14-XXXGB-Empty
D-15-XXXGB-Empty
E-16-XXXGB-Empty
Controllers Found: 2
BC4852 Array Configuration (Build: xx-xxx-xxxxxxx.x)
Arrays
0-00-XXXGB-Empty
1-01-XXXGB-Empty
2-02-XXXGB-Empty
3-03-XXXGB-Empty
4-04-XXXGB-Empty
5-05-XXXGB-Empty
6-06-XXXGB-Empty
Main Menu
7-07-XXXGB-Empty
8-10-XXXGB-Empty
9-11-XXXGB-Empty
A-12-XXXGB-Empty
B-13-XXXGB-Empty
C-14-XXXGB-Empty
D-15-XXXGB-Empty
E-16-XXXGB-Empty
< >< >< >< >=Choose, <Esc>=Back
<Enter>=Select Menu Item
Controllers Found: 2
Disks
Available Keys
Disks
Available Keys
Appendix A : StorTrends® iTX Software Installation
65
Advertisement
Table of Contents
