Omron CJ2 CPU UNIT SOFTWARE User Manual page 274

7 File Operations
CX-Programmer
User programming
User program
Function block
definitions
Network symbols
Symbol table
Comments and
program index
Parameters
(PLC memory, PLC Setup,
I/O tables)
CX-Integrator
Routing tables
CPU Bus Unit Setup
*1: Supported only by the CJ2M CPU Units.
With CJ2H CPU Units, function block
definitions are stored in the User Program
Area instead of the FB Program Area.
*2: Ethernet settings are made and
transferred from the CX-Programmer. Data
link tables are made and transferred from
the CX-Integrator.
*3: Supported only by the CJ2H-CPU6@-EIP
and CJ2M-CPU3@.
Support Software for specific
Special I/O Units or CPU Bus Units
Settings for Special I/O
Units and CPU Bus Units
7-22
*1
*2
*2
CPU Unit
User Program Area
User program
*1
FB Program Area
Function block
definitions
*3
Tag Memory Area
Network symbols
Source and comment areas
Program source
Symbol table
Comments and
program index
Parameter Area
Parameters
Routing tables
CPU Bus Unit
Setup Area
I/O Memory Areas
• The CX-Programmer is
used to set specific I/O
memory bits and writing to
words in the I/O Memory
Area.
Special I/O Units and CPU Bus Units
Settings for Special I/O
Units and CPU Bus Units
CJ2 CPU Unit Software User's Manual