A-1-2 Sequence Output Instructions - Omron CJ2 CPU UNIT SOFTWARE User Manual

A-1-2 Sequence Output Instructions
Instruction Mnemonic
OUTPUT OUT ---
!OUT
OUTPUT NOT OUT NOT ---
!OUT NOT
KEEP KEEP 011
!KEEP
DIFFERENTI- DIFU 013
ATE UP
!DIFU
DIFFERENTI- DIFD 014
ATE DOWN
!DIFD
SET SET ---
@SET
%SET
!SET
!@SET
!%SET
RESET RSET ---
@RSET
%RSET
!RSET
!@RSET
!%RSET
MULTIPLE BIT SETA 530
SET
@SETA
CJ2 CPU Unit Software User's Manual
Code Symbol/Operand
S (Set)
KEEP(011)
R (Reset)
B
B: Bit
DIFU(013)
B
B: Bit
DIFD(014)
B
B: Bit
SET
B
B: Bit
RSET
B
B: Bit
SETA(530)
D: Beginning word
N1: Beginning bit
N2: Number of bits
Function
Outputs the result (execution condition) of the logical
processing to the specified bit.
Reverses the result (execution condition) of the logical
processing, and outputs it to the specified bit.
Operates as a latching relay.
Set
Reset
S execution
condition
R execution
condition
Status of B
DIFU(013) turns the designated bit ON for one cycle when
the execution condition goes from OFF to ON (rising edge).
Execution
condition
Status of B
One cycle
DIFD(014) turns the designated bit ON for one cycle when
the execution condition goes from ON to OFF (falling edge).
Execution
condition
Status of B
One cycle
SET turns the operand bit ON when the execution condition
is ON.
Execution
condition of SET
Status of B
RSET turns the operand bit OFF when the execution condition
is ON.
Execution
condition of RSET
Status of B
SETA(530) turns ON the specified number of consecutive bits.
Appendices
Execution
Location
condition
Output Required
Output Required
Output Required
Output Required
Output Required
Output Required
Output Required
Output Required
N2 bits are set
to 1 (ON).
A-5