Omron CJ2 CPU UNIT SOFTWARE User Manual page 655

2
Open the Administrative Tools and select Windows Firewall with Advanced Security from the dia-
log box that is displayed.
3
Select Inbound Rules under Windows Firewall with Advanced Security on Local Computer on
the left side of the Windows Firewall with Advanced Security Dialog Box.
4
Select New Rule under Inbound Rules in the Actions Area on the right side of the dialog box.
5
Make the following settings for each step in the New Inbound Rule Wizard Dialog Box, clicking
the Next Button to move between steps.
Rule Type
Program
Protocol and Ports
Scope
Action
Profile
Name
6
Click the Finish Button. The rule that you defined will be registered in the Inbound Rules (e.g.,
Omron_EIP).
7
Close the Windows Firewall with Advanced Security Dialog Box.
8
When you attempt to connect the CX-Programmer to a PLC on an EtherNet/IP network through
an Ethernet port, the Windows Security Alert Dialog Box will be displayed.
CJ2 CPU Unit Software User's Manual
Select Custom.
Select All Programs.
Select ICMPv4 as the protocol type.
Select Any IP address for everything.
Select Allow the connection.
Select Domain, Private, and Public.
Enter any name, e.g., Omron_EIP.
Appendices
A-171