Cables You May Need To Order - Paradyne 9161 Installation Instructions Manual

What Does a T1 NAM Do?
The T1 NAM acts as an interface between the T1 digital network and the customer
premises equipment, converting signals received from the DTE to bipolar signals that
can be transmitted over T1 and Fractional T1 lines. The T1 NAM also provides a
DSX-1 drop and insert port to allow DTEs supporting the DS1 signal format to share
the network T1 with other high-speed equipment, as well as two synchronous data
ports. Typical applications include:
Wide Area Networks (WANs)
Channel extension
Video teleconferencing

Cables You May Need to Order

The following cables are specifically for this product. See page A of either the
Model 916x/926x T1 Access Mux User's Guide (Document No. 9161-A2-GB20) or the
Model 916x/926x T1 Access Mux Technical Reference (Document No. 9161-A2-GH30)
for ordering information. You can also see the Technical Reference for cable pin-out
information.
If connecting to a . . .
PC (DB9 interface/connector –
EIA-232 connection)
PC (DB9 interface/connector –
EIA-232 connection)
DTE with a V.35
interface/connector
DTE with a RS-449
interface/connector
DTE with a V.11/X.21
interface/connector
LAN Adapter
Order a . . .
COM Port-to-Terminal/Printer cable (14 )
COM Port-to-PC cable (14 )
MS34 to DB25 adapter cable for each port: Port 1
and/or Port 2 (1 )
DB37 to DB25 DTE adapter cable for each port:
Port 1 and/or Port 2 (1 )
DB15 to DB25 adapter cable for each port: Port 1
and/or Port 2 (1 )
COM Port-to-LAN Adapter cable (14 )
2