4. Back up search results. See Back up search results for details.
5. To export the search results as a .CSV file, click Export Results.
4.2.4.4 Behavior Search
Search for images based on VCA behaviors including cross line detection, enter area
detection, leave area detection, smart motion detection, etc. Behaviors supported for search
may vary with NVR model.
1. Go to Menu > VCA > VCA Search > Behavior Search
2. Set search conditions.
Parameter
Select Camera
Start/End Time
Event Type
Description
Select the camera(s) to search.
Specify the time period to search.
Note:
A search range smaller than five months is recommended,
because earlier snapshots and recordings may have been overwritten
due to full storage.
Select the event type to search.
86
UNIGUARD 4 & 8 HDD Series