Advertisement
2. Select Enable Alarm Service.
3. Configure the parameters.
Parameter
Server Address
Server Port
Note:
This configuration only enables the sending of alarm- related packets to the alarm
host. The specific alarm methods on the alarm host need to be configured separately.
4. Click Apply.
4.3.2.3 Video & Image Database Local Config
Configure VIID local settings so the NVR can monitor vehicles and upload vehicle information to
the upper platform.
1. Go to Menu > Network > Platform > Video & Image Database Local Config.
2. The local ID and local port use the default settings by default.
3. Choose a camera, click
Parameter
Description
Upper server's IP address.
Upper server's port number.
under Configure, and then configure the parameters.
Description
101
UNIGUARD 4 & 8 HDD Series
Advertisement
